ZETRON 15P, Руководство по эксплуатации

Страница: 64 / 124

Section 5. Programming
5-16
Custom Two-Tone Format
To program this format, select the “c2tonE” prompt from the format selection menu. Table
5-12 explains the various prompts that are used by this format, and Table 5-13 shows the
keys that are used for editing.
Table 5-12 Custom Two-Tone Format Prompts
Prompt Explanation
C This is the capcode prompt. This is the number that is entered during the paging
cycle to send a Two-Tone page. Valid characters are the digits 0 through 9. One to
four digits in any combination is allowed and each combination is unique (ex: 0001
vs. 01 vs. 1). To exit from programming this format, press the CLEAR key while at
this prompt.
A 0.0 The “A” tone frequency (the first tone sent). The valid range is 250.0Hz to 3500.0 Hz.
d 0.000 The “A” tone duration. The valid range is 0.000 to 9.999 seconds.
G 0.000 The gap time duration between tones “A” and “B”. The valid range is between 0.000
and 9.999 seconds.
b 0.0 The “B” tone frequency ( the second tone sent). The valid range is 250.0 to 3500.0
Hz.
d 0.000 The “B” tone duration. The valid range is 0.000 to 9.999 seconds. This duration can
be left at zero if you are constructing a single-tone page.
Alrt 0 The Alert Tone. This prompt sets which Alert Tone, if any, follows the page. The valid
settings are: 0 = No alert sent, 1 = Hi/Lo warble, 2 = five rapid beeps, 3 = slow siren,
4 = fast siren
tALH 0 Talk enable/disable. This is a yes/no field that selects whether or not a talk time
follows the page and Alert tone. The valid settings are: 0 = No, 1 = Yes
Table 5-13 Editing Keys for the Custom Two-Tone Format
Key Used Function
C Clear the display
A Review previous capcode
B Review next capcode.
D Delete a capcode.
CLEAR - Stop editing and return to capcode entry.
- Stop capcode entry and exit the format.
ENTER To enter displayed data as input.