ZETRON 15P, Руководство по эксплуатации

Страница: 69 / 124

Section 5. Programming
5-21
POCSAG Format
For POCSAG tone-only and alpha/numeric pagers, select the POCSAG format prompt, and
press ENTER. Table 5-18 shows and explains all of the prompts for this format.
Table 5-18 POCSAG Format Prompts
Major
Prompt Conditional
Prompt
Explanation
StrP = Number of capcode digits strapped within the encoder. A valid
response is from 0 to a maximum of 5 digits.
StP(n)= If StrP > 0, this prompt requests the digit desired for the strap
position shown. StP1= is always the first digit sent, StP2= is the
next and so on.
Fnct = A prompt asking whether or not to strap the function code.
0 = disabled, 1 = enabled
diGt = If Fnct = 1, this prompts for the function code to strap. This
number may have a value from 1 to 4.
tALH = 0 = Talk disable; 1 = enable Talk time.
bAUd = Entering a "0" will select 512 baud operation, entering a "1" will
select 1200 baud operation and a "2" will select 2400 baud
operation.
ALFA = A 0 (default) or a 1 needs to be entered to disable / enable
alphanumeric messages. Up to 255 alpha characters may be
sent if enabled or a maximum of 20 numbers may be sent in
numeric only operation.
d4 = A 1 = NEC type D4 pager operation, 0 = NEC D4 disabled. This
option is only available if alphanumeric messaging is enabled.