ZETRON 15P, Руководство по эксплуатации

Страница: 33 / 124

Section 3. Operation
3-9
Operation
When the power-up tests are complete, the following message is printed on the CRT screen:
Model 15P Field Programmable, Ver: 2.1
Copyright, 1984-1996, ZETRON INC.
KEYPAD ACTIVE: Any key activates CRT.
Enter capcode:
When the encoder is first powered up, it expects to receive commands from the keypad. All
keys (0-9,A-D,*,#) typed at the encoder's keypad are displayed on the CRT. To begin input
from the CRT, press any character on the CRT keyboard, the following message is displayed:
CRT ACTIVE...
Enter capcode:
The encoder displays “CRT ON” when it expects input from the CRT. Characters typed on
the CRT are NOT displayed on the encoder's display.
Special Keys
Table 3.
OPERATION-2
shows which keys are used to accomplish equivalent functions on
both the encoder's keypad and the CRT keyboard.
Table 3. OPERATION-2 Keypad vs. CRT Key Functions
KEYPAD CRT FUNCTION
ENTER CTRL-K The keypad ENTER key or CRT CTRL-K key is used to
enter a page on the stack for later recall and paging. The
keypad ENTER key is also used to accept entered
programming data in the program mode.
CLEAR CTRL-C The keypad CLEAR key or CRT CTRL-C key is used to
cancel a page or message entry or to abort a page in
progress.
PAGE ENTER The keypad PAGE key or CRT ENTER (or RETURN)
key is used to start a page. The keypad PAGE key is
also used to accept entered programming data in the
program mode.
BACKSPACE The CRT BACKSPACE key (not available on keypad) is
used to erase the last character entered.