ZETRON 15P, Руководство по эксплуатации

Страница: 58 / 124

Section 5. Programming
5-10
Five-Tone
For 5/6-tone format programming (full 100,000 call capacity) select the paging format
prompt “5 tonE”, then press ENTER. Table 5.
PROGRAMMING-6
shows and explains the
prompts for this format.
Table 5. PROGRAMMING-6 Five-Tone Format Prompts
Major
Prompt Conditional
Prompt
Explanation
tALH= 0 = Talk time disable; 1 = Talk time enable. Talk time value set in
System programming.
PrE = 0 = Disable preamble, 1= Enables the sending of a preamble digit
to the pager prior to the address digits.
StrP = Number of strapped digits. If Preamble is enabled, up to four
digits may be strapped. If Preamble is disabled, a maximum of
three digits may be strapped.
StP(n)= If the number of strapped digits is > 0, this prompt requests the
digit desired for the strapped number position shown. “StP1=“
would be the preamble digit, if enabled, and is always the first
digit sent. “StP2=“ is the next digit, so forth.
rEPt = Number of times to repeat page. Range is 0 to 9.
tYPE = Tones/Timing type. 0 = EIA, 1 = CCIR, 2 = ZVEI, 3 = EEA.
Addr = Address mode. 0 = single, 1 = dual, 2 = extra digit.