Zero 88 ILLUSION 120 Скачать руководство пользователя страница 60

Страница: 60 / 106

Running SMPTE/MIDI Shows

When the desk is running in SMPTE or
MIDI time mode, there is an option
available to choose between an

Internal

External

time source.

The Internal time source allows shows
which are programmed in SMPTE or
MIDI time modes to be tested manually
when the external SMPTE or MIDI time
code signal is not available.

The External time source is used when
a SMPTE or MIDI time code signal is
connected to the desk.

Selecting the Time Source

From the Memories screen - select the

Extra Functions

button, then select the

Internal Timecode

External

Timecode

option from the menu.

From the Cueline screen - select the
soft button displayed to the right of the
zoom buttons. This button toggles
between

Internal

and

External

Internal Time Source

When the time source is set to

Internal

the desk generates the required
SMPTE or MIDI timecode signal
internally.

The GO, PAUSE and GO PREVIOUS
buttons on the front panel are then
used to play, pause and reset the
timecode respectively.

The OVERRIDE control on the front
panel is used to speed up or slow
down the timecode signal.

Three soft buttons are also provided on
the Memories and Cueline screens to
play, pause and reset the timecode
signal.

External Time Source

When the time source is set to

External

, the show can only be run if a

suitable external SMPTE or MIDI
timecode signal is provided.

The GO, PAUSE and GO PREVIOUS
buttons and OVERRIDE control on the
front panel are disabled.

The Playback X MASTER fader works
as normal.

Changing Time Input Mode

If memories have been programmed
and the

Time Input

mode is changed in

Desk Setup

the trigger data for the

memories will be modified as follows:

•

Real Time to SMPTE

triggers are changed to

Automatic

triggers stay the same.

Time

triggers remain the same; the

number of frames is set to zero (eg.
12:34:56 is converted to 12:34:56.00).

•

Real Time to MIDI

triggers are changed to

Automatic

triggers stay the same.

Time

triggers remain the same; the

number of frames is set to zero.

•

SMPTE to Real Time

Automatic

triggers stay the same.

Time

triggers are rounded to the

nearest second (eg 23:12:39.23 is
rounded to 23:12:40).

•

MIDI to Real Time

Automatic

triggers stay the same.

Time

triggers are rounded to the

nearest second.

•

SMPTE to MIDI

No changes.

•

MIDI to SMPTE

No changes.

5 - 20

Memories

Figure 5 - 19: Memories Screen (SMPTE Time Mode)

Содержание ILLUSION 120











































































































Результаты поиска

Содержание ILLUSION 120

Отзывы:

Похожие инструкции для ILLUSION 120

Бренды по названию

Популярные бренды

Zero 88 ILLUSION 120, Руководство по эксплуатации

Результаты поиска

Содержание ILLUSION 120

Отзывы:

Похожие инструкции для ILLUSION 120

Бренды по названию

Популярные бренды