Zero 88 ILLUSION 120, Руководство по эксплуатации

Страница: 32 / 106

Set Tracking Mode
This option provides the facility to
enable or disable Tracking on the
desk. The default state is normal
mode, ie. Tracking disabled.
For further information on
programming in Tracking mode see
chapter 5.
Enable/Disable Tracking
1. Select
Set Tracking Mode
from
the Desk Setup options.
2. Move to the
Tracking Mode
field.
Use the cursor keys or mouse to
select
Enabled
or
Disabled
as
required.
Saving or Cancelling Desk
Setup
The Desk Setup Window can only be
closed by either Saving or Cancelling
the Desk Setup.
To save the Desk Setup -select the
Save button in the Desk Setup Window
or press F7 on the front panel or
keyboard.
To cancel the Desk Setup - select the
Cancel button in the Desk Setup
Window or press F8 on the front panel
or keyboard.
NOTES
Desk Setup
While the Desk Setup Window is displayed
the screen function keys (F1 - F8) are
disabled. Therefore it is not possible to
display any of the other screens (Memories,
Submasters, Cueline etc.) until Desk Setup
has been exited in a controlled manner,
either by saving or cancelling.
Saving Desk Setup
Any changes made to the Desk Setup will
only take effect when the Desk Setup is
saved.
It is possible to continue running the show
while in Desk Setup, but the DMX outputs
will be halted momentarily if the Desk Setup
is saved.
Tracking Mode
When Tracking is enabled, “TRK” is
displayed in the Information Bar at the
bottom of the monitor screen.
Changing Tracking Mode
Changing the Tracking Mode from enabled to
disabled or vice versa will result in changes to
the channel data in the programmed
memories.
3 - 14
Setup
Figure 3 - 14 : Desk Setup - Set Tracking Mode