AqueenaPro WT-100
Installation and Repair manual
Rev. A
Installation and Repair Manual AqueenaPro WT-100
Page 46 of 64
8.
Place the box on the position; secure it with 4 screws (WT-100-65).
Do not forget put plastic protection to reset buttons
9. Tide up the cable set inside of the device and ensure cables are not squeezed.
10. Assembly the inlet solenoid valve (33) back, follow the steps in reverse order.
18. Flashing solenoid valve (32)
Tools: Philips screwdriver PH2
Spare part: WT-100-80 Flashing Solenoid Valve KIT