AqueenaPro WT-100
Installation and Repair manual
Rev. A
Installation and Repair Manual AqueenaPro WT-100
Page 43 of 64
Note!
To fix the display box to the lower cover WT-100-60 use the correct screws WT-100-69 (M3x12) and
washer
If the panel label WT-100-57 is damaged/scratched/broken and it must be changed, only display kit WT-100-82-
(panel label with the bracket) can be ordered.
17. Control board (24)
Tools: Philips screwdriver PH1
Spare part: WT-100-24 Computer control box with PCBA
WT-100-23 Lower cover of control board
WT-100-65 Cross recessed screw M3x8
1.
To reach the control box , release the inlet solenoid valve (33) firstly.