AqueenaPro WT-100
Installation and Repair manual
Rev. A
Installation and Repair Manual AqueenaPro WT-100
Page 26 of 64
9. Maintenance and filter replacement method
9.1. Flushing the RO Membrane
1. The RO membrane is automatically flush for 15 seconds when the device is turn on.
2. When
the water tank is full, the RO membrane is automatically flush for 18 seconds.
9.2. Filter Replacement Time
Note:
Filters and membrane are consumables. Their replacement time is dependent on the quality of raw water
and water consumption. They are not covered under warranty.
Filter Status Display shows actual filter status.
Green light
– the filter operates at its optimum level.
Orange light
- the filter life time will be exceeded soon.
Red light
along with the audible alarm (4 times buzz) and the filter must be exchanged immediately. Further use
of the filter is not recommended.