ZHD 1500/2000-135/155/175
Safety rules
9
www.zepro.com
2.2
Transport plug
When the lift is installed, the trans-
port plug in the hydraulic unit must
be removed and replaced with the
normal tank cap supplied with the
hydraulic unit.
NOTE.
54853
2.3
Moving parts - free movement
When the final inspection* takes place,
the space occupied by the moving
cylinders must be cleared and made
safe. There is a risk of collision be-
tween the cylinder and the following
items: subframe, truck chassis, mem-
ber for rear lights (number plate) and
the lift’s chassis bracket (with a short
overhang).
*The final inspection must be carried
out with the platform at the vehicle floor
and tilted down 10°. The clearance
from the closest part of the cylinder
must be at least 40 mm.
m
WARNING!
The platform must not be tilted down
more than max. 10° from horizontal
when people are on the platform.
m
WARNING!
min. 40 mm.
10°
10°
Fig. 4. Replace the transport plug with
the normal tank cap
Fig. 5. Clearance to the closest
part of the cylinder must be at least 40 mm
Fig. 6. The platform must not be tilted down
more than 10° from the horizontal
