ZHD 1500/2000-135/155/175
52
Marking and decals
www.zepro.com
Fig. 55. Load diagram
Fig. 56. Identification plate
Fig. 57. Work area
12.2
Load diagram
Load diagram decals are positioned close
to control devices in a clearly visible, suit-
able location on the platform. The decal
clearly shows the nominal load and a load
diagram describing the maximum permit-
ted load at various places on the platform.
12.4
Work area
A “work area” decal must be attached to
the platform so that any drivers parking
behind the vehicle know that 5 m clear-
ance is needed for the platform to open
and that sufficient space should be left
for loading and unloading.
12.3
Identification plate
The identification plate is fitted to the
frame of the tail lift and contains the fol-
lowing information:
• Type of lift
• Max. permitted load in kg
• Production number
• Year of manufacture
• Address and tel. no. of manufacturer
• Country of manufacture
• Type number for approved underrun
protection (RUPD)
• Type number for electromagnetic
compatibility (EMC)
Corresponding identification plate in de-
cal design, preferably placed on the cabin
door upright for reliable identification.
