ZHD 1500/2000-135/155/175
Rear member cut-outs
15
www.zepro.com
5
Rear member cut-outs
It is often necessary to create cut-outs in the rear member to provide space for the platform
arms when the platform is in the upper position. The size of the cut-outs depends on the calcu-
lated installed dimension “A”, see illustration below.
1. Measure and mark the location and depth of the cut-outs on the rear member. The two cut-
outs must be centred on the rear member, i.e. both cut-outs must be an equal distance from
the mid-point of the member.
2. Cut along the markings.
3. Grind away any burrs or sharp edges.
Fig. 13. ZHD 1500/2000
Fig. 14. ZHDL 1500/2000
994
245
245
A
max.
1226
245
245
A
max.
