Zepro ZDK 250 135, Руководство по установке

Страница: 6 / 66

ZDK 250 135/155
6
Important information
www.zepro.com
1.3 Identification
E.g. ZDK 250 - 135 MA
_ _ _ _ _ _ - _ _ _ _ _
ZDK = Standard model
Max. lifting capacity x 10 (kg)
Max. lifting height - 135 = 1340 mm
- 155 = 1530 mm
Cylinder model, MA = Double acting Adjustable Tilt
Single acting Single speed Lift
DA = Double acting Adjustable Tilt
Double acting Single speed Lift
1.4 CE marking
ZEPRO tail lifts for sale on the European market are CE marked (Conformité Européenne). The manufacturer
guarantees that the product complies with the EU Machinery Directive.
Follow the installation instructions carefully. Modifications not approved in writing by the manufacturer are not
permitted. Welding is not permitted.
1.5 Product approval
Properly assembled, this product meets relevant requirements according to EN 1756-1:2001 + A1:2008.
1.6 Hydraulic oil
If the hydraulic oil needs to be replenished, only the oil recommended by ZEPRO is permitted to be used.
Hydraulic systems with hydraulic oil tanks without labelling are only permitted to be filled with highly refined
mineral oil (art. no. 21963, 1 litre).
Hydraulic systems with hydraulic oil tanks marked with a specification for the hydraulic oil are only permitted
to be filled with the oil specified on the label.
1.7 Guarantee
The ZEPRO warranty applies only if assembly has been carried out according to ZEPRO's assembly instruc-
tions by a ZEPRO approved bodybuilder.
After installation, testing and verification, register the tail lift’s delivery card to validate the warranty.