Zepro Z 150-135, Инструкция по установке

Страница: 4 / 38

4
Since 1/1/1995 ZEPRO tail lifts sold to the European
market are stamped with a CE mark. This is the
manufacturer's guarantee that the product conforms
to the European Machinery Directive.
The application of the European Machinery Directive
is intended to harmonise product safety levels across
Europe.
There are some general principals that should be
made clear when performing the installation of ZE-
PRO lifts.
Follow the installation instructions. If it is not possible
to follow the installation instructions or if modifica -
tions are required, the modifications must be appro -
ved by the manufacturer. This is a consequence of
the CE marking regulations as it cannot be possible
for a manufacturer to certify conformity to the Machi-
nery Directive if the product is subsequently changed
without his knowledge or approval. In order for the
product's CE marking to remain applicable the forms
supplied by ZEPRO must be completed in case of
modification.
Welding is not allowed unless specifically recom -
mended by the manufacturer.
In order to increase security, additional decals, which
are diagrammatic and easily understood indepen-
dent of language will be sent with the lifts.
Ensure that these decals are affixed so that the infor -
mation contained on them is available for all users of
the lift.
Position the control unit to ensure that the operator
has a good view of the load, the working area and
the loading area, whilst maintaining a safe
distance from the risk zone between the platform and
the body. Follow the operator’s instructions for use of
the control unit and its functions.
1. CE marking