Zennio GetFace IP
http://www.zennio.com
Tecnical Support
:
http://support.zennio.com
43
LAN Port Settings
: sets the desired port mode (“Autonegotiation” or “Half
Duplex
”).
Tools
:
allows monitoring the network and device status, as well as the
latency of the responses.
In case of
enabling the DHCP server
, the manual network settings will not be
available.
3.2.5.2
DATE & TIME
Date and time can be configured from this section.
It is possible to synchronise the date and time according to those from the PC
(browser). Once synchronised, the
Time Zone
must be set, so winter/summer time
shifts are performed according to the Zennio GetFace IP time zone.
It is also possible to define the time zone rules manually
through the
Time Zone Rule
parameter.
Finally, a
NTP server
can be defined so the device date and time get synchronised by
means of an Internet NTP server, whose URL or IP must be specified.
Figure 37
Date and Time.
3.2.5.3
AUTO PROVISIONING
Firmware and configuration updates in Zennio GetFace IP can be performed either
manually or automatically, from a TFTP / HTTP.
