Zennio GetFace IP
http://www.zennio.com
Tecnical Support
:
http://support.zennio.com
17
To that end, the aforementioned parameters are configured as detailed below, under
Services
HTTP API
Services
.
System API
:
“
Unsecure (TCP)
”, with no authentication.
Switch API
:
“Secure (TLS)” with “Digest
”
authentication.
Camera API
:
“Unsecure (TCP)”. If a camera preview is required, the
authentication should be set to
“None”.
Figure 11
HTTP API Services.
ACCOUNTS
The
Account n
tabs allow setting up user configuration profiles that restrict certain
actions depending on the username and password. Up to five accounts are possible,
each with a username and a password and with different access privileges, either
monitor or control privileges. These accounts allow a higher security level, as
authentication with Z41 COM is required.
If Z41 COM is configured with a username and a password through the
Opening
Method
parameter, then an analogous configuration should be performed in the
Accounts
tab to allow the opening of the door lock system.
Moreover, the
Switch Access
checkbox should be activated. Otherwise, the door
unlocking will not work successfully. If this configuration is not desired, the username
and password fields should be left blank in both devices.
