Zennio GetFace IP
http://www.zennio.com
Tecnical Support
:
http://support.zennio.com
14
CALLS
The
Calls
tab allows setting up the parameters related to the video-calls. The
intercom’s response to an incoming call is parameterised under
Incoming calls
. As the
video intercom is designed for one-way calls, this field is set to
“Always busy” by
default.
Under
Outgoing calls
, the timing of the calls can be defined:
The
Ring Time Limit
is the unanswered call maximum duration. It is
advisable to set a length longer than 20 seconds.
Call Time Limit
sets the maximum duration of the call. After this time, the call
is finished automatically. The end of this call will be warned by Zennio
GetFace IP by beeping 10 seconds in advance. In such case, the call can be
extended by simply pressing on any button from the touch display module
(ZVP-TOUCHD) or from the keypad module (ZVP-KEYPAD), if configured.
Figure 7
Calls.
AUDIO
Audio output settings can be configured in the
Audio
tab. It consists of:
Audio Codecs: Services
Phone
Audio.
Giving the highest priority to
the G.722 codec is encouraged, as show in in Figure 8.
