IRSC Zone
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com
15
Auto
:
destined to let the machine decide by itself how to behave at each
moment (sending cold air / sending hot air). In relation to the calculation of
the general setpoint and to the grille control, under the “Auto” mode IRSC
Zone will behave as under the “Cool” mode.
Fan
: destined to generate a simple air flow, typically at ambient temperature,
from the air conditioning machine. When this mode begins, IRSC Zone keeps
the air grilles of every enabled zone permanently open
Dry
:
destined to generate a dry air flow, typically at ambient temperature,
from the air conditioner machine, so that the humidity in the air is reduced.
As shown in Figure 6, the Mode window allows configuring the commutation from one
mode to another will be performed:
Figure 6.
Mode window
Individual control
: when this option is selected, all the described working
modes will be selectable through one specific 1-bit communication: this
means that 5 objects will be deployed for establishing one of the available
modes (Auto, Cool, Fan, Heat and Dry), by sending the value "1" through
them, as well as 5 more objects for reflecting the status (active, not active) of
every individual mode.
1 byte control
: when this option is selected, the working modes can be
controlled through a unique 1-byte communication object, "A/C Unit - Modes
[1 byte]", by sending the value corresponding to the mode to be activated. It is
also possible to check at any time the current working mode of the A/C unit,
via the 1-byte object "A/C Unit - Modes Status [1 byte]".
Simplified control
:
when this option is selected, the 1-bit object "A/C Unit -
Simplified Mode" will be enabled. It allows establishing the desired mode:
