IRSC Zone
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com
17
Force medium fan under
: sets the minimum number of grilles that must
be open before it is permitted to commute from the medium fan speed to
the maximum fan speed (object "A/C unit - Fan status" will reflect the
current fan level; see Table 1).
Initial speed percentage
Interpolated speed percentage
Level
0%
0%
Auto
1-33%
33%
Minimum
34-66%
66%
Medium
67-100%
100%
Maximum
Table 1.
Fan speed percentages
Step control
:
selecting this option ("Yes") brings the 1-bit object "A/C unit -
Fan step", which allows increasing (sending the value "1") or decreasing
(value "0") the fan speed by one level (for example, under the minimum level
of speed, if the value "1" is sent via this fan step object, the speed will
become medium).
Precise control
: selecting this option ("Yes") brings the 1-byte object "A/C
unit - Fan precise", which allows establishing the value, in percentage, of the
desired fan speed level, according to the values shown in Table 1.
Step control and Precise control can be jointly enabled, so that the fan speed can be
controlled in one manner or other at any time, as desired.
3.5
TEMPERATURE
From this window it is possible to configure several parameters related to the setpoint
temperature sent to the A/C Unit.
Note that the parameters shown below do not apply in modes “Auto”, “Fan” or “Dry”.
