IRSC Zone
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com
3
DOCUMENT UPDATES
Version
Modifications
Page(s)
[1.7]_a
Changes in the application program
:
- New parameter added (“Zone update after reset”) to
allow sending read requests for the states, modes and
zone setpoints after bus failures.
- Revision of texts and parameter names.
- Function added to let the device store the current mode
on bus failures even if the machine was off.
- Inversion of the order of certain read requests sent after
reset, in order to avoid unexpected behaviours of the
device (such as when both the
normal
mode and the
extended
mode read requests receive a response).
- Implementation of the temperature restriction even when
the machine is off, not only when it gets switched on.
- Reset of the variables of the PI control algorithm when
power failures occur.
-
Revision of the description about the “Open bypass if…”
parameter.
12
New parameter added: “Zone update after reset”.
13
Extended description about the temperature restriction
function.
18-19
Revision of the practical example in Annex III.
27
Revision of texts and styles.
-
[1.6]_a
Changes in the application program
:
Option added to send read requests to the bus of certain
objects in order to recover the state of the device after a
download or a device reset from ETS.
-
