IRSC Zone
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com
21
•
Cycle time: value, in minutes, for the sending period of the PWM control
variable during the grille control process.
•
Proportional band: parameter required for calculating the proportional
integral function, expressed in Kelvin.
•
Integral time: parameter required for calculating the proportional integral
function, expressed in minutes.
Annex II. Grille control
includes a brief introduction to these two thermostatic control
methods, and to what they involve in relation to grille control. In addition, to obtain
detailed information about all these parameters related to the thermostatic control,
please refer to the specific document "
Zennio Thermostat “Home”
", available at
http://www.zennio.com
.
3.7
RESET
From this window, it is possible to configure whether to send or not to the KNX bus
and/or to the A/C unit the statuses of the different options that have been enabled by
parameter, after recovering from a bus power failure and/or after a device reset or a
download from ETS.
Figure 10.
Reset window
Sending statuses to bus on bus voltage recovery
: it allows choosing
whether to send the status objects of the A/C unit to the KNX bus or not after
a bus power failure, a device reset order from ETS or a download.
