IRSC Zone
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com
8
2
CONFIGURATION
2.1
GENERAL CONCEPTS
The IRSC Zone application program permits controlling air conditioning systems from
different manufacturers as if they were being controlled through the infrared remote
control of the machine.
A correspondence table is available at the Zennio homepage (
http://www.zennio.com
)
with the codes (from 0 to 255) corresponding to the different remote controls that can
be emulated. This number is the first parameter to be set in ETS, so that the orders
sent by IRSC become particularised for the actual A/C unit to be controlled.
The IRSC Zone application also allows selecting the number of the zones of the KNX
installation that will be controlled by the same central A/C machine, which can be 1 – 8.
Moreover, the following functionalities of the A/C system can be controlled by IRSC:
Switching ON/OFF
each of the enabled zones.
Setpoint temperature
of each enabled zone.
Working mode
:
the desired working mode (Automatic, Heat, Cool, Fan, Dry)
may be chosen through independent binary objects (one per mode) or
through a sole object (only one object for the mode selection). Moreover,
apart from these conventional controls, it is possible to enable a simplified
control, which only permits commuting from Heat to Cold and vice versa.
Fan speed
:
step-controlled or through a precise control.
Thermostat
: it is possible to enable and configure this functionality for Heat
mode, Cool mode or both.
For further details and examples please refer to the Annexes of this manual.
