DALIBOX Broadcast 6CH/4CH
http://www.zennio.com
Soporte técnico:
http://support.zennio.com
24
A
one-bit object
(On/Off).
A
one-byte object
, which indicates the dimming level (in percentage).
ETS PARAMETERISATION
After enabling this function, the following options will be available.
Figure 9.
Channel “x”. Status Objects
Send On/Off Status
: enables a one-bit object (“
[Cx] On/Off (Status)
”) that
will be sent whenever the channel is switched off (“0”) or on (“1”).
Send Dimming Status
: enables a one-byte object
(“[Cx] Dimming Value
(Status)
”) that will be sent with the current channel dimming value (between
0% and 100%) whenever it changes. Enabling this parameter brings up an
addition one:
Sending Period
: defines the sending cycle time (1 to 255 seconds) of the
status object during a dimming process. If it is set to “0”, the dimming
status will be sent only at the end of the dimming process.
2.2.7
CUSTOM ON/OFF
This function offers up to two additional On/Off controls for the output channel, and
therefore up to two new communication objects to switch the ballasts on and off.
These additional controls can be customised with specific dimming levels for the “On”
and “Off” states, and may also be configured to perform an immediate or soft dimming.
ETS PARAMETERISATION
Once the function has been enabled, the following parameters will show in ETS:
