DALIBOX Broadcast 6CH/4CH
http://www.zennio.com
Soporte técnico:
http://support.zennio.com
19
dimming level of the channel. A
four-bit object
is provided for the reception
of the relative dimming orders.
It is possible to select whether it will be possible to switch off a channel
through a relative dimming order, in case the target value is lower than the
minimum parameterized. If not enabled, the channel will remain at the
minimum level parameterised.
Absolute dimming
: modifies the dimming level through orders that specify
the desired target value, regardless of the current value of the channel. A
one-byte object
is provided for the reception of the absolute dimming orders.
For both dimming modes, the dimming time for the 0% to 100% transition may be
selected among the three different dimming times already defined. An immediate
transition can also be configured, if desired.
ETS PARAMETERISATION
The “Dimming” tab contains the following parameters:
Figure 7.
Channel X. Dimming
Relative Dimming (4 bits)
: this section allows setting up the configuration of
the relative dimming function and the
four-bit
object “
[Ch] Relative
Dimming
”.
Relative Dimming Time
: “At Once”, “Dimming Time 1”, “Dimming Time 2”,
“Dimming Time 3”. See section 2.2.1.
Allow Switching Off via Relative Dimming
: sets whether the channel
should be switched off in case a decrease order with a dimming value
lower than the minimum value parameterised is received.
