Zenith P40V24, Инструкция по установке и эксплуатации, Страница: 23 / 32

23
17. Treble (Command:r)
G
To adjust treble.
You can also adjust treble in the Audio menu
Transmission
Data Min: 00 ~ Max: 64
* Refer to ‘Real Data Mapping1’. See page 22.
[k][r][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data Min: 00 ~ Max: 64
[r][ ][Set ID][ ][OK][Data][x]
18. Bass (Command:s)
G
To adjust bass.
You can also adjust bass in the Sound menu.
Transmission
Data Min: 00 ~ Max: 64
* Refer to ‘Real Data Mapping1’. See page 22.
[k][s][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data Min: 00 ~ Max: 64
[s][ ][Set ID][ ][OK][Data][x]
19. Balance (Command:t)
G
To adjust balance.
You can also adjust balance in the Sound menu.
Transmission
Data Min: 00 ~ Max: 64
* Refer to ‘Real Data Mapping1’. See page 22.
[k][t][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data Min: 00 ~ Max: 64
[t][ ][Set ID][ ][OK][Data][x]
20. Color Temperature (Command:u)
G
To adjust Color Temperature.
You can also adjust CSM in the Video menu.
Transmission
Data o: Normal 1: Cool 2: Warm 3: User
Data o: Normal 1: Cool 2: Warm 3: User
[k][u][ ][Set ID][ ][Data][Cr]
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
16. PIP Position (Command:q)
G
To select sub picture position for PIP.
You can also adjust the sub picture position using the
position on the remote control or in the Special menu.
Transmission
Data 0: Right down on screen
1: Left down on screen
2: Left up on screen
3: Right up on screen
[k][q][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data 0: Right down on screen
1: Left down on screen
2: Left up on screen
3: Right up on screen
[q][ ][Set ID][ ][OK][Data][x]
15. Sound Input Select (Command:p)
G
To select main or sub (inset) sound for PIP picture.
You can also select sound in PIP mode on the
Special menu.
Transmission
[k][p][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data 0: Main picture sound
1: Sub picture sound
Data 0: Main picture sound
1: Sub picture sound
[p][ ][Set ID][ ][OK][Data][x]
14. PIP (Command:n)
G
To control the PIP (Picture In picture).
You can also control the PIP using the pip button on
the remote control or in the Special menu.
Transmission
Data 0: PIP off
1: PIP on
[k][n][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data 0: PIP off
1: PIP on
[n][ ][Set ID][ ][OK][Data][x]