Zenith P40V24, Инструкция по установке и эксплуатации, Страница: 12 / 32

12
1. Press the menu button.
2. Press the
D
/
E
button.
• Each time you press this button the menus appear in the following sequence.
3. Press the
G
button and then use
D
/
E
/
F
/
G
button to select a function you want to use.
• Press the enter button to exit.
Functions Check
PSM G
Colour Temp. G
Contrast 100 G
Brightness 50
G
Colour 50
G
Sharpness 50
G
Tint 0 G
G OK
SSM G
AVL G
Treble 50 G
Bass 50 G
Balance 0
G
G OK
Language G
ARC G
Screen Adj. G
Orbiter G
White Wash
G
PIP
G
Transparency
G
Set ID G
G OK
Video Menu Audio Menu Special Menu
DE
DE DE
Turning on the Monitor
Turning on the Monitor just after installation
Turning on the Monitor (power cord is still connected)
1. Connect power cord correctly.
2. Press the ON/OFF button on the Monitor. At this moment, the Monitor is switched to standby mode. Press the
INPUT SELECT button on the Monitor or press the power on, or video/pc button on the remote control to switch
the Monitor on.
1. If the Monitor is turned off with the ON/OFF button on the Monitor
• Press the ON/OFF button on the Monitor to turn the Monitor on.
2. If the Monitor is turned off with the remote control and also the ON/OFF button on the Monitor
• Press the
ON/OFF button on the Monitor and then press the INPUT SELECT button on the Monitor or press
the power on, or video/pc button on the remote control to turn the Monitor on.
Menu Language Setup
- The menus can be shown on the screen in the selected language. First select your language.
1. Press the menu button and then use
D
/
E
button to select the menu.
2. Press the
G
button and then use D
/
E button to select Language.
3. Press the
G
button and then use D
/
E button to select your desired language.
From this point on, the on-screen display will be shown in the language of your choice.
4. Press the enter button.