Zenith P40V24, Инструкция по установке и эксплуатации, Страница: 18 / 32

18
- PIP lets you view 2 different inputs (sources) on your monitor screen at the same time. One source will be large,
and the other source will show a smaller inset image.
- Select RGB input source before pressing PIP
- This function works only in the following resolution;
Component (480p, 720p, 1080i), RGB-PC 640x480, 800x600 (only in Vertical frequency 60 Hz)
- With PIP active, not all picture formats can be used for the main/sub picture.
PIP (Picture-in-Picture) Feature
Press the pip button to show the sub picture.
• Press the PIP button again to turn PIP off.
Press the position button in PIP mode.
• Each press of the position button will move the sub picture to a different position on the screen in a clockwise direction.
Press the input select button in PIP mode.
• Each time you press input select button, you toggle between Video, S-Video and Component.
Component source only works in 480i mode.
- Select RGB input source before pressing PIP.
- To use this function, connect PC video port to RGB-PC INPUT(VGA/SVGA) input and connect PC audio port to
AUDIO INPUT.
- Sound Select is always selected Sound[M] regardless of prior sound choice.
1. Press the menu button and then use D
/
E button to select the menu.
2. Press the
G
button and then use D
/
E button to select PIP.
3. Press the G button and then use
D
/
E
button to select Sound Select.
4. Press the
G
button and then use D
/
E to select main image sound (Sound[M]) or PIP
(inset image) sound (Sound[S]).
5. Press the enter button.
Language G
ARC G
Screen Adj. G
Orbiter G
White Wash G
PIP G
Transparency G
Set ID G
G To Set
PIP
W
W
atching PIP
atching PIP
Selecting a Input Signal Source for PIP Selecting a Input Signal Source for PIP
Selecting PIP
Selecting PIP
Sound Options
Sound Options
Moving the Sub Picture Moving the Sub Picture