Zenith P40V24, Инструкция по установке и эксплуатации, Страница: 21 / 32

21
06. Volume Control (Command:f)
G
To adjust volume.
You can also adjust volume with the volume buttons
on remote control.
Transmission
Data Min: 00 ~ Max: 64
* Refer to ‘Real Data Mapping1’.
[k][f][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data Min: 00 ~ Max: 64
[f][ ][Set ID][ ][OK][Data][x]
03. Aspect Ratio (Command:c) (Main Picture Format)
G
To adjust the screen format.
You can also adjust the screen format using the ratio
(Aspect Ratio Control) button on remote control or in
the Special menu.
Transmission
Data 0: Wide screen (16:9)
1: Normal screen (4:3)
2: Full screen (Zoom)
[k][c][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data 0: Wide screen (16:9)
1: Normal screen (4:3)
2: Full screen (Zoom)
[c][ ][Set ID][ ][OK][Data][x]
04. Screen Mute (Command:d)
G
To select screen mute on/off.
Transmission
Data 0: Screen mute off (Picture on)
1: Screen mute on (Picture off)
[k][d][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data 0: Screen mute off (Picture on)
1: Screen mute on (Picture off)
[d][ ][Set ID][ ][OK][Data][x]
02. Input Select (Command:b) (Main Picture Input)
G
To select input source for the Monitor.
You can also select an input source using the
video/pc button on the Monitor's remote control.
Transmission
Data 0: RGB
1: Component
2: Video
3: S-Video
Data 0: RGB
1: Component
2: Video
3: S-Video
[k][b][ ][Set ID][ ][Data][Cr]
Acknowledgement
[b][ ][Set ID][ ][OK][Data][x]
01. Power (Command:a)
G
To control Power On of the Monitor.
Transmission
Data 0: Power Off 1: Power On
Data 0: Power Off 1: Power On
Data 0: Power Off 1: Power On
Data 0: Power Off 1: Power On
[k][a][ ][Set ID][ ][Data][Cr]
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
G
To show Power On/Off.
Transmission
[k][a][ ][Set ID][ ][FF][Cr]
Acknowledgement
Note: As indicated above, if other functions transmit ‘FF’
data based on this format, Acknowledgement data
feedback presents status about each function.
[a][ ][Set ID][ ][OK][Data][x]
05. Volume Mute (Command:e)
G
To control volume mute on/off.
You can also adjust mute using the mute button on
remote control.
Transmission
Data 0: Volume mute on (Volume off)
1: Volume mute off (Volume on)
[k][e][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data 0: Volume mute on (Volume off)
1: Volume mute off (Volume on)
[e][ ][Set ID][ ][OK][Data][x]