Zenith P40V24, Инструкция по установке и эксплуатации, Страница: 16 / 32

16
• To initialize the adjusted value, select Reset with the D
/
E button and then press the
G
button.
1. Press the menu button and then use D
/
E button to select the menu.
2. Press the G button and then use
D
/
E
button to select Screen Adj.
3. Press the
G
button and then use D
/
E button to select V-Position or H-Position.
• Use V-Position for vertical position adjustments.
• Use H-Position for horizontal position adjustments.
4. Press the
G
button and then use
F
/
G
button to adjust for desired horizontal or verti-
cal position and then press the enter button.
• Based on the input mode, the adjustment range for V-Position or H-Position may
change.
• Based on the input signal, the position of the picture may not change even though
you have adjusted the horizontal or vertical position with this function.
- Avoid allowing a fixed image to remain on the Monitor's screen for a long period of time. A frozen still picture
from a PC/video game set displayed on the screen for prolonged periods will result in a ghost image remaining
on the screen even after you change the image.
- To avoid a permanent image on the screen, the screen will move every 2 minutes.
- The Orbiter feature may help prevent ghost images. However, it is best not to allow any fixed image to remain on
the screen.
1. Press the menu button and then use
D / E
button to select the menu.
2. Press the
G
button and then use D
/
E button to select Orbiter.
3. Press the G button and then use
D
/
E
button to select On or Off.
4. Press the enter button.
Language
G
ARC
G
Screen Adj.
G
Orbiter G
White Wash G
PIP G
Transparency G
Set ID G
On
Off Orbiter
Auto-Configure G
V-Position
G
H-Position
G
Phase
G
Reset G
0
V-Position
Adjusting Horizontal / V
Adjusting Horizontal / V
ertical Position (RGB mode only)
ertical Position (RGB mode only)
Initializing (Reset to Factory value (RGB mode only) Initializing (Reset to Factory value (RGB mode only)
Orbiter
Orbiter
- If the picture isn’t clear after auto adjustment and especially if characters are still jittery, adjust the picture
phase manually.
1. Press the MENU button and then use D
/
E button to select the menu.
2. Press the G button and then use
D
/
E
button to select Phase.
3. Press the G button and then use F / G button to adjust phase.
•
Phase adjustment range is 0 ~ 63.
4. Press the OK button.
Auto-Configure
G
V-Position
G
H-Position
G
Phase G
Reset G
30 Phase
Adjusting Phase (RGB mode only)
Adjusting Phase (RGB mode only)