Zenith P40V24, Инструкция по установке и эксплуатации, Страница: 13 / 32

13
Video Menu Options
1. Press the psm button to select the picture appearance setup option.
• Each press of the psm button changes menu options as shown below.
• You can also select Dynamic, Mild or User in the menu.
• PSM Dynamic and Mild settings are preset for good picture reproduction at the factory and cannot be changed.
Dynamic Mild User
- PSM adjusts the Monitor to the best picture appearance
- PSM is not available in PC mode and PIP.
CSM
G
Red G
Green G
Blue G
Normal
Cool
Warm
User
CSM
- Adjustments also affect the color temperature of other input sources. Readjust color temperature for PC input
(RGB) if necessary.
- To initialize values (reset to default settings), select the ‘Normal’ option.
1. Press the menu button and then use D
/
E button to select the menu.
2. Press the
G
button and then use D
/
E button to select Colour Temp..
3. Press the
G
button and then use D
/
E button to select CSM.
4. Press the
G
button and then use D
/
E button to select the desired color temperature.
• Each press of
D / E
button changes the menu options as shown below.
5. Press the enter button.
Normal Cool Warm User
- You should adjust colour temperature for PC mode again if color temperature is adjusted for another input source.
- To initialize adjusted value, select ‘0’ in Red, Green and Blue.
1. Press the menu button and then use D
/
E button to select the menu.
2. Press the
G
button and then use D
/
E button to select the Colour Temp..
3. Press the
G
button and then use D
/
E button to select a color.
4. Press the
G
button and then use
F
/
G
button to make appropriate adjustments.
• The adjustment range of Red, Green and Blue is -50~+50.
5. Press the enter button.
CSM
G
Red G
Green G
Blue G
0 Red
PSM (Picture Status Memory)
PSM (Picture Status Memory)
Adjusting Adjusting Auto Color Control Auto Color Control
Manual Color Manual Color T T emperature Control (User option) emperature Control (User option)
- You can adjust picture contrast, brightness, colour, sharpness and tint to the levels you prefer.
- PIP settings are not adjustable.
1. Press the menu button and then
D / E
button to select the menu.
2. Press the G button and then use
D
/
E
button to select the desired menu option.
3. Press the G button and then use F / G button to make appropriate adjustments.
4. Press the enter button.
PSM G
Colour Temp. G
Contrast 100 G
Brightness 50 G
Colour 50 G
Sharpness 50 G
Tint 0 G
Contrast 100
Manual Picture Control (User Option)
Manual Picture Control (User Option)