10
ASSEMBLY
SETUP INSTRUCTIONS
ZEN STAND UP DESK
1
2
D
C
Using the 3mm hex key included with the parts, slightly loosen the 8 grub screws located
on the bottom of both crossbar ends.
Fully separate the ends. Inside you will find the crossbar rails (D).
C
A
Position one of the Crossbar Ends on its side.
Place one of the legs into the Crossbar End ensuring that the bar is on top in relation to
the leg. The arrow above points to this part, ensure its at the top as its screwed into the
desktop later on.
Line up the holes on each Leg with the holes on each Crossbar End.