21
PROGRAMMING THE
SYSTEM
Changing CM to INCHES on the display
1. Press the DOWN button on the Keypad until the desk reaches its lowest position, then
release for 2 seconds.
2. Press and hold the 1 button for about 5 seconds while the LED flashes RST and then
switches to either:
• 10.3 = cm
• 10.4 = inches
3. Your desk will display its current setting (standard is 10.3), then return to RST. To change
you will need to reset the desk, then repeat steps 1 and 2 to change the settings to Inches.
ADDITIONAL PROGRAMMING
Handset Lock
Recommended for use when children are around your desk is our lock feature. To activate:
1. At any working height, press and hold the M button for about 8 seconds.
2. Your LED display should now display LOC.
3. Your desk is now locked at that height.
To Remove:
1. Press and hold the M button for 8 seconds.
2. Your LED should return to the displayed height.
3. Your desk is now unlocked.
