5
SAFETY INSTRUCTIONS
Keep all electrical components away from liquids.
• Do not sit or stand on the desk or desk frame.
• Do not crawl or lie under the desk frame once assembled.
• Do not place any objects taller than 50cm underneath the desk.
Do not open any of the components - the Legs, Control Box, or Controller. There is a
risk of electric shock. Warranty will also be voided.
•
This product is designed with a duty cycle of 10%. 2 minutes on, 18 minutes off. These
figures must NOT be exceeded, as this will result in overheating of the motor and control
box, and may reduce the life of the system. This data is recorded and may be analysed
during a warranty claim.
• In the event of a power outage or if the power cord is unplugged, a full system reset may
be necessary. Please refer to the troubleshooting section.
Before Installation, Reinstallation, or Troubleshooting:
• Stop the Zen Space Desk.
•
Turn the power supply off and unplug the desk from the wall outlet.
• Remove all objects from the desktop to reduce weight.
Before start up:
• Make sure the Zen Space Desk has been assembled as per this manual.
•
System Connection - individual parts must be connected before the control box is
connected to the main power supply.
• Ensure the cables are not damaged.
If the control box makes unusual noises or has an odour, switch off the main power
supply immediately and contact customer service.
