Zelmer zvc012zq, Руководство пользователя

Страница: 40 / 40

46
ZVC012ZQ-001_v01
Ecology – Environmental protection
Each user can contribute to protect the environment. It is
neither difficult nor expensive. In order to do so:
Return cardboard packages to recycling points.
Throw polyethylene (PE) bags into appropriate
containers.
Batteries contain substances harmful to the
natural environment. Do not throw them away
with other household waste. Return used
batteries to recycling points.
Before disposing of or returning the appliance to a recycling
point make sure to remove the batteries from the battery
compartment. Return a worn out appliance to an appropriate
collecting point as the components of the appliance may
pose a threat to the environment.
Do not dispose the appliance with the municipal waste!
The manufacturer does not accept any liability for any damages
resulting from unintended use or improper handling.
The manufacturer reserves his right to modify the product any time
in order to adjust it to the regulations, norms, directives or due to
construction, trade, aesthetic or other reasons without notifying in
advance.
Examples of problems while operating the vacuum cleaner
PROBLEM POSSIBLE REASON ACTION
The appliance does not
operate.
Batteries are discharged. Charge the batteries.
The hand vacuum cleaner is
incorrectly installed.
Install the hand vacuum cleaner correctly.
The suction power of the
vacuum cleaner is week.
The dust container is full. Empty and clean the dust container.
The EPA filter is clogged. Clean or replace the EPA filter with a new one.
The air inlet or the electrobrush roller
is clogged.
Clean the electrobrush roller, unclog the air inlet.
The vacuum cleaner is not
charging.
The power cord plug is not plugged to
the wall socket.
Plug the power cord to the wall socket.
The charging station is not connected
with the base.
Connect the charging station with the base.
The hand vacuum cleaner in not
installed on the housing.
Install the hand vacuum cleaner on the housing.
The vacuum cleaner operating
time after charging is very short.
Charging time was too short. Charge the appliance according to the
instructions.
Be careful not to damage the bristle or the
roller of the electrobrush.
4
Install the cleaned roller in the electrobrush. The roller
should properly fit into the electrobrush holes. Press the
other end of the roller to the electrobrush housing.
●
Install the cover. Turn the cover lock into position „ ”.
STORING
1 It is recommended to store the vacuum cleaner
accessories on specially designed for this purpose rack
located on the charging station.
2
The most convenient way to store the vacuum cleaner is
to keep it on the charging station in the upright position. To
reduce the space occupied, store the vacuum cleaner with
the handle folded.
●
If necessary clean the housing and the dust container
with a damp cloth (possibly moisten with a washing-up
liquid), dry or wipe dry.
G