Zelmer IR4200, Руководство пользователя

Страница: 86 / 88

86
IR4200-001_v01
●
When the set temperature is reached, the set type of
fabric stops flashing and you will hear a single sound
signal.
Ecology – environment protection
Each user can protect the natural environment. It is neither
difficult nor expensive.
In order to do it: put the cardboard packing into
recycling paper container; put the polyethylene
(PE) bags into container for plastic.
When worn out, dispose the appliance to
particular disposal centre, because of the
dangerous elements of this appliance, which
can be hazardous for natural environment.
Do not dispose the appliance with the municipal waste!
The manufacturer/importer does not accept any liability for any
damages resulting from unintended use or improper handling.
The manufacturer/importer reserves his rights to modify the product
any time in order to adjust it to law regulations, norms, directives,
or due to construction, trade, aesthetic or other reasons, without
notifying in advance.
10 Release the Self-Cleaning Button when self cleaning is
complete.
11 Place the iron on a flat and level surface and allow it to
cool down completely.
12 Wipe the soleplate with a cold damp cloth.
The water flowing out of the soleplate is very
hot. Take extra care when performing the self-
clean operation.
ANTI DRIP
●
The anti-drip system is designed to prevent water leaking
from the soleplate when the iron is not sufficiently hot.
●
When engaged, the anti drip system may produce
a clicking sound, particularly during heat-up or when the
iron is cooling down. This is normal and indicates that the
system is working correctly.
AUTO OFF
The iron has an auto-off feature in vertical and horizontal
position which activates automatically when the appliance is
plugged in and left unattended.
1 The iron will shut-off automatically after about 30
seconds of inactivity if left on its soleplate (in horizontal
position) and after about 8 minutes in vertical position.
2 You will hear sound signal. The display illumination will
go off and the Auto-shut off symbol “ ” will start flashing on
the screen.
3
Move the unit to continue ironing. The iron will go back to
the previous settings and will heat-up again.
Each time the iron is used / moved, it returns to
its previous settings. It will take approximately
60 seconds for the iron to reach the set
temperature.
Cleaning And Maintenance
●
Unplug the appliance.
●
Before cleaning, allow the iron to cool completely.
●
Use a soft cloth and mild detergent for cleaning the iron.
●
For cleaning the housing, do not use abrasive cleaning
agents such as emulsions, creams, pastes, etc. They
may remove graphic symbols, such as scales, markings,
warning signs, etc.
●
Never use sharp or rough objects to remove the deposits
from the soleplate.
●
Never use any abrasive, vinegar or descaling agents to
clean the soleplate.
Additional information
●
Each time you press the ON/OFF/Temperature
Increase Button “ ” or the Steam ON/OFF
Button “ ” you will hear sound signal.