![background image](http://html1.mh-extra.com/html/zeiss/opmi-pentero/opmi-pentero_brief-instructions_3360805015.webp)
G-30-1702-en
OPMI® Pentero® Software Release 2.2
Issue 2.0
Printed on 17. 03. 2008
15
Configuring the handgrips
You can trigger the functions of the surgical microscope using the buttons
on the handgrips or on a foot control panel. Programmable buttons can be
configured for the requirements of each user.
Both handgrips are identical. In the basic setting, joystick (1) can be used
for motorized fine movement in the XY directions.
You can configure both handgrips with the same functions (CONFIG), or
you can configure different functions in the right and left handgrip.
The CONFIG menu / STAND / HANDGRIPS permits you to select the
functions to be assigned to programmable buttons
A, B, D
or
E
. The
rocker switches for
Zoom
and
Focus
can be reconfigured by the user.
Briefly press button (C) on the touchscreen.
The display and functions will be swapped.
Configuring the handgrip buttons
Press
CONFIG
to configure both handgrips. For separate programming
of the left or right handgrip, press the LEFT or RIGHT button respectively.
The buttons are only displayed if the CONFIG button has been pressed.
Press the button (
A, B, D, E
) to which you would like to assign a different
function.Then press the relevant function in selection menu (2) to assign
it to the selected button. The labeling of the button is changed and indi-
cates the new function.
Press the
RESET
button to restore the factory settings.
Note:
The joystick on the right handgrip is used for special functions in op-
tional applications.
1
Focus +
Zoom +
Focus -
Zoom -
C
USER
AUDIO/VIDEO
LIGHT
LEFT
MENU
PAT-FILES
FOOT
SWITCH
MOTORS XY
BRAKES
Photo
Autofocus
OPMI
CONFIG
Photo
Videorec
Light Intensity
Fluorescence
MultiVision
Aux
RESET
Focus +
Focus -
Light +
Autofocus
Zoom +
Zoom -
Light -
STAND
A
2
HANDGRIP
No function
Factory settings
RIGHT
31.12.
04
23:56
User:
XXXXXXXX
Patient:
: Ext:.........%
MULTIVISION
SYSTEM INFO
TELEPHONE
FLUORESCENCE
CONFIG
B
1
FOCUS
ZOOM
D
E
G-30-1458
Содержание OPMI Pentero
