Zeiss LSM 700, Быстрое руководство

Страница: 4 / 27

2
01/2013
Starting the System
Switching on the LSM 700 system
x
Turn on the LSM 700 system via the switch-
operated multipoint connectors (power strips 1
and 2) on the system. This switches on all
system components except attached scanning
stages, the microscope and its illumination
(HBO 100, XBO 75 or HXP 120).
x
If using the Axio Observer microscope stand,
push the power button at the left hand side
first to switch on the microscope.
x
Turn the key switch (Fig. 1/ 1 ) of the electronics
and laser module to the right to start the laser.
The yellow LED in return turns on. If this is not
the case, check the power switch (Fig. 2/
2 ) on
the back of the laser module.
x
On the back of the system there is a plastic
screw (Fig. 2/
1 ). This is a laser interlock which
can be used for coupling the laser module e.g.
to doors. If this screw is
unscrewed the lasers
will not turn on!
Switching on the HXP 120 or the HBO 100
or the XBO 75 lamps
x
Switch on the main switch of the HXP 120 /
HBO 100 / XBO 75 lamps for reflected light
illumination via the power supply as described
in the respective operating manual.
Switching on the scanning stage
x
If attached, switch on the scanning stage via the
controller.
Fig. 1 Electronics and laser module
Fig. 2 Electronics and laser module