10
01/2013
Setting up the microscope
Changing between direct observation and laser scanning mode
On the
Locate
tab, the basic switch between manual operation of the microscope (observation of the
specimen with the eye) and laser scanning mode is located.
x
Click on the
Locate
tab to access the microscope controls.
Pressing the
Oculars Online
button sets the Ocular tool active –
the specimen can be observed and all changes in the ocular tool
take effect immediately. When pressing the
Oculars Offline
button the system stays in the imaging mode. Changes in the
ocular tool do only take effect once the
Locate
tab is set in the
active mode (
Oculars Online
) again. When leaving the
Locate
tab the software remembers the state of the
Oculars
Online
/
Offline
buttons.
x
Click on the
Acquisition
tab to start imaging (laser scanning
mode). After pressing one of the start buttons the system
automatically switches laser scanning mode.
Содержание LSM 700
Страница 2: ......
Страница 16: ...14 01 2013 Fig 15 Proposals panel of the Smart Setup tool...
