Humphrey Matrix User Manual
2660021138935 Rev. F 2015-11
Patient Testing
5-1
(5) Patient Testing
Chapter Overview
To prepare to perform a visual field test, follow the simple procedure sections outlined
below:
•
Test Set-Up
, page
5-1
•
Patient Selection
, page
5-1
•
Administering the Test
, page
5-10
•
Patient Correction
, page
5-11
•
Patient Seating and Position
, page
5-12
•
Explaining the Test Procedure to the Patient
, page
5-12
•
Testing
, page
5-13
Test Set-Up
1. When you are ready to conduct the first test of the day, remove the Calibration Cap
from the Patient Eyepiece. Replace the calibration cap on the Patient Eyepiece when
the instrument is not in use to minimize the accumulation of dust and debris on the
Patient Eyepiece.
2. Check that the Patient Visor is in the correct position to test the corresponding eye. For
testing the RIGHT eye (factory default setting), position the Patient Visor so that it
extends past the housings on your RIGHT side when viewing from the Operator LCD
side of the instrument. This positions the Patient Eyepiece on the RIGHT side facing
the Patient Visor. If the Patient Visor is not correctly positioned, a popup message will
appear on the screen when the Start Test button is pressed.
3. Make sure the Patient Response button is properly connected. The patient test will not
begin if the Patient Response button is not connected.
Patient Selection
From the M
AIN
M
ENU
Screen (F1), select the button for the test that you want to perform or
the Select Patient button. Pressing the Select Patient button will use the most recent
test/settings for patients already in the instrument database, if the Use Patient’s Previous
Settings box on the
Systems Settings – Testing
was checked. Otherwise, a default test
will be performed. Either selection proceeds to the V
IEW
P
ATIENTS
Screen (
Figure 5-1
).
Alternatively, you may select the V
IEW
P
ATIENTS
(F2) Screen directly from the Task bar or by
pressing the F2 key on the keyboard.
On the V
IEW
P
ATIENTS
Screen you can select patients from the following sources on the
Source drop-down menu:
• Local Database: Patients saved on the local Matrix instrument database, or new
patients you add to the local database. See
Local Database (Search Local
Database or Add New Patient)
on page
5-7
.
Содержание Humphrey Matrix 800
