Zeiss Humphrey Matrix 800, Руководство пользователя

Страница: 112 / 158

Printer Configuration
Humphrey Matrix User Manual 2660021138935 Rev. F 2015-11
9-4
Underneath the base of the unit there are two power cord receptacles, one for a printer
and the other to power the instrument.
1. If your Matrix is connected to an isolation transformer (see Printer Safety on page
9-2 ), plug the printer power cord supplied with the printer into the accessory power
OUTPUT receptacle on the unit ( Figure 9-1 , left). If your Matrix is not connected to
an isolation transformer, you must plug the printer power cord into a different power
outlet than the Matrix. Note: You may need a different power cable with a smaller
plug to connect your printer to the power outlet on the Matrix.
2. Plug the approved hospital grade power cord provided with the instrument into the
appropriate Power Cord INPUT receptacle ( Figure 9-1 , right).
3. Verify ALL connections are fully seated.
4. Once all the cables are connected, turn the Matrix Visual Field Instrument upright.
5. Verify that the instrument feet are not on top of any cables.
CAUTION: Use only the printer and printer cables provided (or approved alternate)
with this device to meet medical safety requirements.