Zeiss Humphrey Matrix 800, Руководство пользователя

Страница: 103 / 158

Humphrey Matrix User Manual 2660021138935 Rev. F 2015-11
Networking Configuration 8-13
Configure Network Settings on the Matrix
1. Select System Settings (F5) > Networking to display the N
ETWORKING
Screen ( Figure
8-11 ).
Figure 8-11 System Settings – Networking Screen
2. Select DHCP to use a DHCP (Dynamic Host Configuration Protocol) server to
automatically assign an IP address to the Matrix instrument.
3. If your network uses static IP addresses, contact your network administrator to have
the Matrix added, or select Manual and fill in the IP Address, Subnet Mask, and
Default Gateway fields. Matrix Name is a user configurable setting. The default
value is Matrix-serial_number. Reboot the instrument and DICOM server if you change
the value.
4. If you selected the Manual IP Configuration, click the Save button when all the
necessary fields are completed.
When switching from Manual IP to DHCP, or DHCP to Manual, the displayed IP addresses
are not updated until after you click the SAVE button.
If you change the Matrix Name and end the name with a period, a tool tip message is
displayed: A hostname label may not be empty. This means that the Matrix expects to see
additional text following that period. You may use a period in the host name but not at the
end of the name.