START-UP
Axioskop
2
plus
Carl Zeiss
Attachments and conversions
Axioskop 2
mot plus
2-26
B 40-075 e 10/03
2.2.11
Attachment of intermediate tube
with height adjustment
The intermediate tube with height adjustment may
only be used in combination with a binocular
ergotube.
When removing the intermediate tube and
attaching the binocular ergotube, make absolutely
sure to screw the tube lens into the binocular
ergotube again. Otherwise, correct imaging of the
specimen is not possible.
•
Use SW 3 ball-headed screwdriver to loosen
clamping screw (2-40/
7
) and remove attached
binocular tube in an upward direction.
•
Remove dust cap (2-40/
9
) from the dovetail of
the intermediate tube with height adjustment
(2-40/
).
•
Insert dovetail of intermediate tube in the stand
opening (2-40/
8
) and tighten clamping screw
) only slightly.
•
Align intermediate tube with the outer edges of
the stand, then tighten clamping screw
).
•
2
) from the binocular
1
). The tool from the storage
) must be used to remove the tube
lens. Insert pins in the drilled holes of the tube
lens mount and remove tube lens by turning.
The tube lens should then be stored in the case.
•
Remove upper dust cap (2-40/
4
) from the intermediate tube with height adjustment.
•
Insert the binocular ergotube with the dovetail in the upper opening (2-40/
10
) of the intermediate
tube, align it and fix it with the clamping screw (2-40/
6
).
Fig. 2-40
Attachment of intermediate tube
with height adjustment
Содержание Axioskop 2 plus
Страница 1: ...Operating Manual Axioskop 2 plus Axioskop 2 mot plus Routine Microscope ...
Страница 68: ...START UP Axioskop 2 plus Carl Zeiss Axioskop 2 mot plus 2 36 B 40 075 e 10 03 ...
Страница 130: ...CARE MAINTENANCE TROUBLESHOOTING AND SERVICE Axioskop 2 plus Carl Zeiss Axioskop 2 mot plus 4 10 B 40 075 e 10 03 ...