Zeiss Axio Scope.A1, Руководство по эксплуатации

Страница: 61 / 123

STARTUP
Axio Scope.A1 Mounting Optional Components Carl Zeiss
M60-2-0007 e 05/08
61
The reflecting (coated) side (
550H550H
Fig. 3-46/ 3 )
of the color splitter has a tapered edge
(
551H551H
Fig. 3-46/ 1 ) or corner (
552H552H
Fig. 3-46/ 2 ).
•
Put the excitation part of the module
(
553H553H
Fig. 3-45/ 1 ) on the emission part (
554H554H
Fig. 3-45/ 4 )
– holding fixtures (
555H555H
Fig. 3-45/ 5b ) and eyelets
(
556H556H
Fig. 3-45/ 5a ) latch together. Hold both parts
together and turn them back into mounting
position.
•
Replace the slit screws and tighten them.
•
Last, stick the sticker with the name of the filter
combination on the side of the module.
3.4.7 Mounting the Polarizer D or the
Filter Holder
•
For an easy assembly, remove the condenser
carrier (
557H557H
Fig. 3-47/ 3 ) fully, with the stage carrier.
•
If necessary, unscrew stop bolt and bracket bolt
with overview fixture from the condenser
carrier.
•
Hold the polarizer or filter holder (
558H558H
Fig. 3-47/ 6 )
parallel to the bottom of the condenser carrier
(
559H559H
Fig. 3-47/ 3 ) and screw the bracket bolt
(
560H560H
Fig. 3-47/ 4 ) of the polarizer (
561H561H
Fig. 3-47/ 6 ) with
the angled adjustment lever (
562H562H
Fig. 3-47/ 5 ) in to
the front threaded opening at the left below
the condenser carrier (
563H563H
Fig. 3-47/ 3 ) until it stops.
•
Screw the stop bolt (
564H564H
Fig. 3-47/ 2 ) with the
adjustment lever (
565H565H
Fig. 3-47/ 1 ) to the stop into
the back threaded opening of the condenser
carrier (
566H566H
Fig. 3-47/ 3 ).
Proceed analogically when mounting the other components listed in the Systems Overview.
Fig. 3-46 Labeling the color splitter
Fig. 3-47 Mounting the polarizer D