STARTUP
Axio Scope.A1
Mounting the Standard Components
Carl Zeiss
M60-2-0007 e 05/08
39
3.1.9
Mechanical Stages with Friction Adjustment
Drive length and friction for the X- and Y-adjustment can be adjusted individually on the standard
mechanical stage (432035-9000-000) and the mechanical stage 432035-9070-000.
(1) Adjusting the drive length on the stage
drive
The drive length of the X- and Y-drive can be
adjusted by an axial shift of the gear knob
(
360H360H
Fig. 3-14/
4
and
1
) within a range of approx.
15 mm.
(2) Adjusting the frictional momentum of the
gear knobs for the X-/Y-adjustment of the
mechanical stage
The friction momentum of the gear knobs is
factory-adjusted to a mid degree which can be
changed as follows if necessary:
a) X-drive
•
Slide the gear knob for the X-adjustment (
361H361H
Fig.
3-14/
4
) all the way down.
•
Take the enclosed adjustment pin (
362H362H
Fig. 3-14/
5
)
out of the gear knob for the Y-adjustment (
363H363H
Fig.
3-14/
1
) and stick it into one of the holes on the
lower hole nut (
364H364H
Fig. 3-14/
3
).
•
Hold the gear knob for the X- adjustment (
365H365H
Fig. 3-14/
4
) and turn the hole nut with the adjustment pin
clockwise (smaller friction momentum:
–
) or counter clockwise (larger friction momentum:
+
) until you
reach the desired friction degree (see
366H366H
Fig. 3-14).
•
The adjustment should not be more than
one
rotation.
b) Y-drive
•
Slide the gear knob for the Y-adjustment (
367H367H
Fig. 3-14/
1
) all the way up.
•
Stick the enclosed adjustment pin (
368H368H
Fig. 3-14/
5
) into the hole on the upper hole nut (
369H369H
Fig. 3-14/
2
).
•
Hold the gear knob for the Y-adjustment (
370H370H
Fig. 3-14/
1
) and turn the hole nut with the adjustment pin
clockwise (smaller friction momentum:
–
) or counter clockwise (larger friction momentum:
+
) until you
reach the desired friction degree.
•
The adjustment should not be more than
one
rotation.
•
Replace the adjustment pin in the gear knob for the Y-adjustment (
371H371H
Fig. 3-14/
1
).
Fig. 3-14
Adjusting the frictional momentum
Содержание Axio Scope.A1
