Zeiss Axio Scope.A1, Руководство по эксплуатации

Страница: 56 / 123

STARTUP
Carl Zeiss Mounting Optional Components Axio Scope.A1
56
M60-2-0007 e 05/08
3.4 Mounting Optional Components
Make sure to unplug the stand and the external power supply units before you begin any
mounting work.
After finishing working the appropriate components must be put back into functional condition
(see chapters
501H501H
3.1 to
502H502H
3.3).
3.4.1 Changing the Upper Stand Part and
Inserting a Centerpiece for Larger
Specimens
•
Remove the magnetically held cover (
503H503H
Fig.
3-39/ 2 ) of the upper stand part by inserting a
screwdriver into the special front opening (
504H504H
Fig.
3-39/ 1 ). Then lift the cover.
•
Hold the upper stand part (
505H505H
Fig. 3-39/ 4 ),
unscrew the six hexagon socket screws (
506H506H
Fig.
3-39/ 3 ) with the ball head screwdriver SW 5
and remove the upper stand part.
•
If you want to mount a centerpiece (
507H507H
Fig.
3-39/ 6 ), then proceed by screwing the
appropriate spacers (
508H508H
Fig. 3-39/ 7 ) with the
included key SW 8 into the lower stand part.
Then mount the centerpiece 30 mm or 60 mm
•
Mount the upper stand part to be mounted
(
509H509H
Fig. 3-39/ 4 ) onto the lower stand part or the
centerpiece, hold it and tighten the six hexagon
socket screws (
510H510H
Fig. 3-39/ 3 ).
•
Replace the cover.
•
Check the stage carrier position and change it if
necessary (see chapter
511H511H
3.1.13).
Fig. 3-39 Changing the upper stand part,
inserting a centerpiece