Zeiss ApoTome.2, Руководство по эксплуатации

Страница: 23 / 34

STARTUP
ApoTome.2 Microscope stand requirements Carl Zeiss
05/2012 423667-7144-001 23
3 STARTUP
The users can install and start up the ApoTome.2 themselves.
On request, however, Zeiss Service will install or convert the ApoTome.2 with costs at the customer's
place.
Before installing and starting up the device carefully read the Notes on device safety .
3.1 Microscope stand requirements
The grid projection method used for the ApoTome.2 is very sensitive to vibrations that may originate
from different sources. Vibrations are visible in the result image as streak artifacts. Therefore, the
microscope should be installed as free from vibrations as possible on an anti-vibration table or a suitable
microscope support.
3.2 Unpacking ApoTome.2
The ApoTome.2 slider is delivered in a polyethylene box with outer carton package. The ApoTome.2
control box is delivered in an outer carton package.
Besides the slider, the box contains the accessories required for the calibration of ApoTome.2:
−
Reflector module Calibration ACR P&C
−
Fluorescence test specimen for grid focus calibration
−
Mirror specimen with cross-line graticule for phase calibration
• Remove all units from the packaging and verify that all components listed on the delivery note are
present.
• Keep the original packaging for a possible longer storage or return of the instrument to the
manufacturer or dispose of it properly.