Zeiss 304970-9100-000, Инструкция по эксплуатации

Страница: 32 / 82

Layout and mode of functioning 14-Function Foot Control Panel, Wired or Wireless
Version 6.1
Page 32 G-30-1706-en
FCP upgrade kit (optional)
Components of the FCP upgrade kit
1 Socket for connecting cable
Connection of the foot control panel via a connecting cable (if provided).
2 Orientation switch
Specifies the orientation of the focus and zoom functions.
– Transverse orientation (A) (see page 28)
– Longitudinal orientation (B) (see page 26)
The default factory setting is longitudinal orientation (B). You can set the
switch to transverse orientation (A) as required. To do so, push the switch
upward using a small screwdriver.
3 "Ready for use" status indicator
– Shining green: The foot control panel is ready for use; there are no
errors.
– Shining orange: The foot control panel has detected a temporary fault
and corrects this independently.
– Shining red: The foot control panel is not ready for use; there is an
error.
4 Connection status indicator
– Not shining: the foot control panel is operating in wireless mode.
– Shining green:The connecting cable (if provided) is plugged in; the
electric power supply is available.
NOTE! Surgical microscopes suitable for upgrade
– The surgical microscopes with the following stands are compatible with
the foot control panel through upgrade using the FCP upgrade kit:
S7, S8, S81 and S88.
– Upgrades to any other systems are not possible.
M
B