Zeiss 304970-9100-000, Инструкция по эксплуатации

Страница: 53 / 82

Version 6.1
G-30-1706-en
Page 53
14-Function Foot Control Panel, Wired or Wireless Operation
Wired foot control panel checklist
• Always check the function of the foot control panel before surgery
(without patient!) using the following checklist:
Prerequisites

The stand is switched on.

The FCP upgrade kit (optional) is plugged in.

The connection cable is ready for operation and free from any damage.

The connection cable is connected to the stand, optionally to the FCP
upgrade kit.

The freely configurable buttons are configured.
• Check all functions of the foot control panel.

Stand and surgical microscope must react properly when controlled via
the foot control panel.
CAUTION Failure of functions!
For safety reasons, do not use this foot control panel if a function fails.
• Remedy the cause of the failure (see "What to do in the event of
malfunctions") or contact our service department.
CAUTION Unintentional operation of the foot control panel!
A height-adjustable OP table may operate buttons on the foot control panel
unintentionally.
• During set-up and use, ensure that buttons cannot be operated
unintentionally.
NOTE! Use of drapes
The use of the foot control panel with a drape reduces friction on the floor
and thus limits slip resistance.