ZeeVee ZyPer, Руководство пользователя

Страница: 44 / 73

78 79
Commands
set decoder
Sets the audio output type for the specified decoder.
Syntax
set decoder id mode type
Parameters
id
Type: STRING or MAC Address
The name or MAC address of the decoder. String names are case-sensitive.
mode
Type: STRING
The audio output to use.
argument Description
analog-audio-out
Audio output from the Audio port on the decoder.
hdmi-audio-out
Audio output from the HDMI port on the decoder.
type
Type: STRING
The audio mode (analog or HDMI).
argument Description
source analog
Uses the audio output created with the join
command.
source none
No audio output
source hdmi
Uses the HDMI stream.
source hdmi-
downmix
Uses the HDMI-downmix stream.
Example
set decoder 0:1e:c0:f6:a9:44 analog-audio-out source hdmi
Success
Advanced Operation
set device ethernet-management-port
Enables or disables the 1Gb Utility Ethernet port on the specified encoder or decoder.
Syntax
set device id ethernet-management-port arg
Parameters
id
Type: STRING or MAC Address
The name or MAC address of the device. String names are case-sensitive.
arg
Type: STRING
Supply one of the following arguments.
argument Description
enabled
Ethernet port is enabled.
disabled
Ethernet port is disabled.
Example
set device myDecoder5 ethernet-management-port disabled
Success
Related Commands
set device analog-audio mode
set device general name
set device ip
set device rs232
set device source-display iconImageName
set device source-display location
set device source-display manufacturer
set device source-display model
set device source-display serialNumber