ZeeVee ZyPer, Руководство пользователя

Страница: 14 / 73

18 19
Joining Encoders to Decoders
“Joining” is the process of assigning an encoder (source) to a decoder (display) or a video
wall. Before starting the join process, we recommend that you configure the encoder and
decoder settings. Refer to Configuring Encoders and Decoders (page 20) .
1. Login to the Maestro Z. Refer to Accessing Maestro Z (page 12) for more informa-
tion.
2. Drag and drop the desired source on to the desired display.
3. The display icon will change to show that it has now been joined with a source. (Small
chain link icon) Hover over the chain link for additional status info.
4. Continue the join process as desired. Note that joining an encoder with a decoder
that is already joined, will replace the previous join operation.
The join command can also be used to perform the same operation.
See API Command Listing (page 54) for more information.
Basic Operation Basic Operation
Unlinking Encoders and Decoders
As mentioned earlier, joining an encoder with a decoder that is already joined, will
replace the previous join operation. However, there may be situations where you want
to completely remove any source from being shown on a display. To do this, use the
Disconnect AV feature.
1. Login to the Maestro Z. Refer to Accessing Maestro Z (page 12) for more informa-
tion.
2. On the Sources window, left-click on any Source. Select Disconnect AV.
3. Drag that source onto the Display that you would like to unlink
4. The display icon will change to show that it has been unlinked and no longer joined
with any encoder. (Small chain link icon is gone)